| 1. | Calculation of lid - driven cavity flow using
湍流方程组对顶盖驱动方腔流的计算 |
| 2. | Kinetic theory governing equations for cavity flow
用动理学方法推导空化流的控制方程 |
| 3. | Wall stress of horizontal rotary cavity flow
水平旋转空腔环流的壁面应力 |
| 4. | Experimental investigation on cavity flow pattern of slender bodies
细长体空泡流型试验研究 |
| 5. | Numerical simulation of square cavity flow by second - order up - wind finite volume method
二阶迎风有限体积法方腔流数值模拟 |
| 6. | Cavity flow theory
空泡流理论 |
| 7. | Characteristics of kinetic energy and momentum of horizontal rotary cavity flow in internal dissipating tunnel
水平旋转内消能泄水道空腔环流的能动量特性 |
| 8. | The recirculation cavity flows caused by temperature difference are simulated , and the relations between the flow patterns and the rayleigh number are analyzed
对由温差引起的空腔流动进行了模拟，分析了流动特性与雷利数的关系。 |
| 9. | The flame holding technology based on cavity in supersonic combustion was studied systematically and comprehensively . the interaction between gas / liquid injection and cavity flow were studied in non - reaction flows
论文选取基于凹腔的超声速燃烧火焰稳定技术为研究对象,对凹腔燃烧流动过程和凹腔火焰稳定器性能进行了全面深入研究。 |
| 10. | For the larger area contraction ratio , the flow condition becomes more complicated , the discharge of the tunnel and the change of the negative pressure in the cavity pocket will be reduced , but the cavity diameter of the level rotary cavity flow and the dissipation ratio of the system will be increased
面积收缩率较大时，流态变化复杂，泄流量和环流空腔内的负压的变化减小，但空腔环流的空腔直径和泄洪洞的消能率增大。 |
